Cooling
CRAC vs. CRAH Units: Decoding the Air-Handling Alphabet
CRAC and CRAH units are the workhorses of traditional air-cooled data halls. Here is what the acronyms mean and how the two differ.
Spend time around data center engineers and you will hear a pair of acronyms that sound almost identical: CRAC and CRAH. Both refer to the big cooling cabinets that line the walls of many traditional data halls. They do similar jobs, but in different ways, and knowing the difference helps explain how a facility’s cooling plant is put together.
CRAC: computer room air conditioner
A CRAC unit is essentially a self-contained air conditioner designed for a computer room. It has its own refrigeration cycle inside: a compressor, an evaporator coil, an expansion device and a connection to a condenser. Warm room air passes over the cold evaporator coil and leaves cooler. The heat absorbed by the refrigerant is carried to a condenser, often outdoors, where it is released.
CRAC units are common in smaller and older facilities because they do not require a central chilled water plant. Each unit makes its own cooling.
CRAH: computer room air handler
A CRAH unit has no compressor. Instead, it contains a coil filled with chilled water supplied by a central plant of chillers, cooling towers or economizers. Fans push warm room air across the coil, the water absorbs the heat, and the warmed water returns to the plant.
CRAH units are common in larger facilities, where a central plant can produce chilled water efficiently for the whole building. They also pair well with economizers, since the central plant can use free cooling when outdoor conditions allow.
Comparing the two
- Where cooling is made. A CRAC makes cooling inside the unit. A CRAH relies on a central plant.
- Scale. CRACs suit smaller rooms and distributed setups. CRAHs suit larger buildings with central plants.
- Efficiency. Central chilled water plants with economizers can be very efficient at scale, giving CRAHs an advantage in big facilities.
- Maintenance. CRACs have refrigeration components in each unit, which means more distributed maintenance. CRAHs concentrate the complex equipment in the central plant.
- Redundancy. With CRACs, each unit is fairly independent. With CRAHs, the central plant and its piping need their own redundancy.
Other air-handling equipment
The air-handling family includes more members. In-row coolers sit between racks and cool air close to the equipment, which helps with higher densities. Fan walls are large arrays of fans and coils that move big volumes of air in hyperscale buildings. Overhead units and rear-door coils handle specific layouts.
Still relevant in the liquid era
As AI pushes facilities toward liquid cooling, air handlers still matter. Most liquid-cooled halls still have some heat in the air from memory, storage, networking and power supplies, and people working in the room need comfortable conditions. In hybrid facilities, CRAH units and chilled water systems often work alongside coolant distribution units, sharing the same central plant.
So the next time you see CRAC or CRAH on a floor plan, you will know the difference. One makes its own cold. The other borrows it from a plant down the hall.
Tracing the Heat Through Each Unit
Following the heat step by step shows how the two units connect to the outside world differently.
In a CRAC-based room
- Warm air from the servers returns to the CRAC unit, often drawn in at the top.
- Fans push the air across the evaporator coil, where liquid refrigerant absorbs heat and evaporates.
- The compressor inside the unit raises the refrigerant’s pressure and temperature.
- Refrigerant lines carry the hot gas to a condenser, frequently outdoors or on a roof, or to a water-cooled or glycol-cooled condenser connected to a dry cooler.
- The cooled air leaves the CRAC unit, often blowing down into a raised floor plenum.
In a CRAH-based room
- Warm air returns to the CRAH unit.
- Fans push it across a chilled water coil, where water absorbs the heat.
- Warmed water flows through piping back to the central plant.
- The plant cools the water using chillers, cooling towers, economizers or a combination, depending on conditions.
- Cooled air leaves the CRAH and returns to the room or raised floor.
The key difference is where the refrigeration happens. In a CRAC room, it is spread across many units. In a CRAH room, it is concentrated in one plant that can switch to free cooling for the whole building at once.
Features That Improve Either Type
Whichever unit a facility uses, several upgrades have become common because they cut energy use and improve control:
- Variable-speed fans. Older units often ran fans at a constant speed. Variable-speed fans reduce energy significantly when the load is lower, since fan power drops sharply as speed decreases.
- Supply air control. Controlling the temperature of air delivered to servers, rather than the temperature of air returning to the unit, keeps server inlets more stable.
- Coordinated controls. Networked units that share data avoid “fighting,” where one unit humidifies while another dehumidifies, or one cools hard while its neighbor idles.
- Economizer options for CRAC units. Some refrigerant-based units include pumped refrigerant or glycol economizer modes that reduce compressor use in cool weather.
- Pairing with containment. Separating hot and cold air allows units to run with warmer return air and higher efficiency.
Common Mistakes
- Running every unit at full output. Without coordination, units may overcool the room and waste energy.
- Setpoints that are too cold. Overly low temperature targets reduce efficiency and economizer hours without benefiting the equipment.
- Ignoring humidity settings. Tight humidity bands can make units add and remove moisture unnecessarily.
- Poor placement. Units placed far from the hottest racks, or with blocked airflow paths, cannot deliver cooling where it is most needed.
Questions readers ask
Is one acronym newer than the other? Both have been used for a long time. The choice depends more on facility size and design than on age.
Can a facility use both? Yes. Some buildings use CRAH units in large halls served by a central plant and CRAC units in smaller rooms, such as network rooms, that are not connected to it.
Why does the distinction matter to anyone outside the industry? It hints at how a facility makes its cooling, how efficient it may be, and how easily it could adapt to warm-water liquid cooling, which tends to fit naturally with a central water plant.
Reading a floor plan
On drawings, CRAC units are usually shown with refrigerant lines running to outdoor condensers, while CRAH units connect to chilled water supply and return piping. Spotting which kind of line feeds each cabinet is often the fastest way to tell how a room is cooled and how much of its cooling depends on a central plant.
Latest stories
View allCooling
A Coolant Distribution Unit Needs Its Own Power-Loss Story
A liquid-cooled server depends on more than the fluid in its cold plate. Pumps, valves, controls and the connection to the building’s heat-removal system all influence what happens when power is interrupted. The distribution unit belongs in that account.
Photo: Ricardo Gomez Angel / Unsplash
A liquid-cooled server depends on more than the fluid in its cold plate. Pumps, valves, controls and the connection to the building's heat-removal system all influence what happens when power is interrupted. The distribution unit belongs in that account.
The operating distinction
A coolant distribution unit transfers heat between circuits and helps manage conditions on the equipment side. Its exact role varies by design. If circulation or control is interrupted, the server's thermal response depends on the equipment, load and supporting arrangements rather than on the word liquid alone.
The cooling account should also describe what is observed during an interruption. A pump may be energized while a required flow condition is not established. Conversely, a brief control notification may not mean that heat removal has already failed. The instrumentation and sequence matter.
A practical example
Consider a hypothetical hall where servers remain electrically supported during a short interruption. If the associated cooling equipment does not share that support, the useful operating window may be limited by heat removal. Testing should connect those systems rather than evaluate them as unrelated purchases.
Questions worth asking
A power-transfer account should keep cooling behavior within view. The server, circulation equipment and controls form a connected operating story, even when different suppliers describe or test their own components separately during acceptance.
- Which pumps and controls remain powered during a transfer event?
- What heat-removal path stays available while normal service is interrupted?
- Which integrated test demonstrates the intended equipment response?
What the evidence supports
There is no universal safe ride-through period to infer from this description. Equipment limits and site conditions differ. A credible account names the tested configuration and explains the response sequence, including what the system does when conditions approach an operating limit.
An integrated discussion can connect electrical support, coolant circulation and equipment protection without assuming a single universal design. The evidence should state what was operated and what was measured. That keeps a component supplier's valid performance description from becoming an unsupported facility-wide assurance. It also helps readers understand why electrical and cooling teams need a shared account of a transfer event rather than separate success statements.
Follow the heat path and the control path through the interruption, not only the electrical supply to the servers.
Quick check
How much did you catch? Tap a question to see the answer.
1. What else matters besides the fluid in the cold plate?
Answer: Pumps, valves, controls and the link to the building’s heat-removal system.
2. Does an energized pump guarantee flow?
Answer: No. Instrumentation and sequence matter.
3. What can limit the operating window during an outage?
Answer: Heat removal, if the cooling equipment doesn’t share the servers’ power support.
The Pieces of a Liquid Cooling Power Story
A complete account of what happens during a power interruption in a liquid-cooled hall usually involves several systems that may have been specified, purchased and tested by different teams. In general terms, the pieces include:
- The servers and their power supplies. These may be supported by uninterruptible power during a transfer event.
- The coolant distribution unit. Its pumps, valves, sensors and controller move and regulate coolant on the equipment side and exchange heat with the facility side.
- The facility water or heat-rejection system. Chillers, dry coolers, cooling towers or other equipment remove heat from the building loop.
- Controls and monitoring. Building management and equipment controllers decide how each system responds and report conditions to operators.
- Air-side cooling. Many liquid-cooled racks still reject some heat to air, so room cooling may remain part of the picture.
- Thermal mass. The volume of coolant in the loops and the heat capacity of the equipment influence how quickly temperatures change once heat removal is reduced.
Each element may have its own power support arrangement. The useful question is how they behave together in a specific design.
Structuring an Integrated Discussion
The outline below describes how electrical and mechanical teams can build a shared account. The technical detail belongs to qualified engineers and the site’s procedures.
- Describe the event. Name the interruption being considered, such as a utility loss followed by generator start, or a transfer between sources.
- List power support for each element. Identify which pumps, controllers and cooling equipment are supported, and for how long.
- Trace the sequence. Describe what each system does in order, from the first loss of normal power to the return of full cooling.
- Identify the limiting element. Determine which part of the chain sets the practical operating window for the equipment.
- Describe protective responses. State what equipment does if temperatures approach their limits, including any throttling or controlled shutdown.
- Test the integrated chain. Demonstrate the sequence in a defined configuration and record what was measured.
Common mistakes
One mistake is assuming that because servers stay powered, cooling must be adequate. Another is accepting separate component tests as proof of integrated behavior. A third is overlooking control restarts, where equipment regains power but takes time to resume its intended operating mode. A fourth is extending a test result from one load level to another without considering how a heavier load changes the thermal response.
What This Means for Readers Following AI Infrastructure
As high-density computing pushes more facilities toward liquid cooling, the conversation about resilience broadens. A reliable electrical design is necessary, but it is not the whole story. Readers looking at announcements of new liquid-cooled capacity can reasonably ask whether the provider describes an integrated test of power and cooling together. A thoughtful answer suggests that the teams responsible for each have worked from the same account.
The heat does not stop arriving when the power transfers. Something has to keep carrying it away.
Questions Readers Ask
Does liquid cooling make a hall more or less sensitive to power interruptions?
It depends on the design, the coolant volume, the load and how the supporting equipment is powered. There is no single answer for all installations.
Why would a pump be running while flow is inadequate?
A valve position, an air pocket, a control setting or a blockage can prevent the intended flow even when the pump is energized.
Who usually owns the integrated test?
Often the commissioning team working with the owner, with input from equipment suppliers and both electrical and mechanical engineers.
AI infrastructure explainers and news on iPhone, iPad and Apple Watch.
Cooling
Cold Weather Can Reach Cooling Equipment Through Small Exposed Components
Large cooling equipment tends to dominate photographs, but winter exposure can concentrate in a smaller pipe, instrument connection or idle branch. A system’s overall size does not identify its most vulnerable point when outdoor conditions change.
Photo: X F / Unsplash
Large cooling equipment tends to dominate photographs, but winter exposure can concentrate in a smaller pipe, instrument connection or idle branch. A system's overall size does not identify its most vulnerable point when outdoor conditions change.
The operating distinction
Water-containing equipment and associated controls need arrangements appropriate to their environment and design. Exposure can differ between an operating circuit and an isolated section. Insulation, protection systems and operating procedures also need inspection and maintenance; their presence on a drawing does not establish their current condition.
Seasonal checks should include changes made since the last cold period. A repaired pipe route, a relocated instrument or an altered enclosure can introduce a new exposure even when the equipment list appears unchanged. The installed state deserves a fresh comparison with its documentation.
A practical example
Picture an outdoor assembly with a protected main loop and a small branch left unused after maintenance. The branch may face a different thermal condition from the flowing circuit. A winter review should follow the actual installed arrangement, including temporary changes, rather than only the central equipment list.
Questions worth asking
The winter review should connect environmental exposure with the component's current operating state. A protective measure that exists on the original design still needs an owner and a relevant condition check after later changes.
- Which small or idle sections face a different outdoor exposure?
- Who checks the condition of installed freeze-protection measures?
- Have maintenance changes altered the original winter operating arrangement?
What the evidence supports
This is not a field instruction for changing coolant mixtures or electrical protection. Those choices depend on equipment requirements and qualified site procedures. The reporting question is whether the organization has identified exposed components and assigned responsibility for checking the protective measures.
It also helps to distinguish prevention from detection. Protective arrangements address the condition, while an alarm may only tell someone that a limit has been approached or crossed. Neither should be assumed to replace the other. A clear review names what each measure is intended to do, who verifies it and how the site recognizes a loss of protection before treating the winter arrangement as ready.
Winter readiness should follow the real system down to its exposed details, not stop at the main plant.
Quick check
How much did you catch? Tap a question to see the answer.
1. Where can winter exposure concentrate?
Answer: In a small pipe, instrument connection or idle branch.
2. Does insulation on a drawing prove its condition?
Answer: No. It needs inspection and maintenance.
3. What should seasonal checks include?
Answer: Changes made since the last cold period.
Where Small Exposures Tend to Appear
Winter reviews often concentrate on the largest pieces of equipment because they are the most visible and the most expensive. The smaller details can deserve as much attention, since they may have less thermal mass, less flow and less frequent inspection. In general terms, the places worth looking include:
- Instrument connections and sensing lines. Small-diameter tubing that feeds a gauge or transmitter may sit outside the insulated envelope of the main pipe.
- Drains, vents and test points. These are often closed and still for long periods, which can leave them exposed to outdoor conditions.
- Idle or isolated branches. Sections valved off for maintenance or future use may no longer share the flow and temperature of the operating circuit.
- Penetrations and enclosure gaps. Where a pipe passes through a wall, roof or cabinet, damaged seals or missing insulation can concentrate exposure.
- Recently repaired sections. A replacement component may not have received the same insulation or protective arrangement as the original.
- Control and heat-tracing circuits. Protective systems themselves depend on power, settings and working sensors that need confirmation.
A Seasonal Review in Practical Steps
A winter readiness review can be organized as a short sequence that follows the installed system rather than the original drawing set. The detailed technical work belongs to qualified site personnel; the outline below describes how the review is structured.
- Collect changes since the last cold season. Gather records of repairs, relocations, temporary arrangements and enclosure changes.
- Walk the installed arrangement. Compare what is physically present with the documentation, paying attention to small components and idle sections.
- Confirm the protective measures. Check that each intended protection is present, in working condition and assigned to an owner.
- Confirm detection. Verify that alarms tied to winter conditions reach the right people and that the related sensors are reporting.
- Record open items. Note anything that could not be confirmed, with an owner and a target date before the coldest part of the season.
Common mistakes
One mistake is treating last year’s review as still valid when the installed system has changed. Another is assuming that insulation shown on a drawing is intact in the field, despite weather, maintenance traffic and age. A third is relying on detection alone, so that the first sign of a problem is an alarm after protection has already been lost. A fourth is leaving temporary arrangements in place after the work that required them has finished, without anyone noting the change.
What This Means for Readers Following Infrastructure
Seasonal operating risk is one of the quieter factors behind data center reliability. Facilities in colder regions can benefit from outdoor air for cooling during much of the year, which is often discussed as an efficiency advantage. The same environment asks for careful attention to exposure in winter. A provider’s ability to describe its seasonal procedures in general terms, without revealing sensitive details, is a reasonable indicator that the topic has an owner.
The largest machine on the site is rarely the only thing the weather can reach.
This explanation is general education. It is not a field procedure, and coolant, electrical and protection choices belong to qualified specialists following the equipment requirements and site procedures.
Questions Readers Ask
Why would a small pipe be more exposed than a large one?
Smaller components generally hold less fluid and may have less flow, so they can respond to outdoor temperatures more quickly than a large, actively circulating loop.
Is an alarm enough to protect against winter damage?
An alarm tells someone that a condition is developing. It does not by itself prevent the condition, so prevention and detection are usually reviewed together.
When should a winter review take place?
Ideally before the first sustained cold period, with enough time to resolve the items it identifies.
Do temporary maintenance arrangements matter in winter?
Yes. An isolated or bypassed section may face conditions the original design did not anticipate, so temporary states deserve their own check.
AI infrastructure explainers and news on iPhone, iPad and Apple Watch.
Cooling
Cooling Alarms Need an Owner After the Day Shift Leaves
An alarm is a request for a decision, not a cooling system by itself. During an evening or holiday shift, the difference between a useful alert and background noise is often the clarity of ownership and escalation.
Photo: Miha Meglic / Unsplash
An alarm is a request for a decision, not a cooling system by itself. During an evening or holiday shift, the difference between a useful alert and background noise is often the clarity of ownership and escalation.
The operating distinction
Sensors can report a temperature, a leak indication, a pump state or a communication fault. Those signals do not all require the same response. A warning may permit investigation, while another condition demands immediate operational attention under the site's procedures. The person receiving it needs enough context to tell them apart.
Alert ownership should survive changes in staffing and equipment names. A clear notification can identify a meaningful location, explain the current operating mode and point to the applicable response record. That context reduces the effort needed to establish what the message refers to.
A practical example
Picture a hypothetical control room receiving a high-temperature alert from an isolated sensor. The response should connect the location, affected equipment and related readings. A message that contains only a device number forces the operator to reconstruct the system while the condition is changing.
Questions worth asking
An alert becomes actionable when its recipient can connect the message to equipment, context and responsibility. Reviewing that connection is more informative than comparing the total number of warnings generated by different systems.
- Who receives the alert when the primary contact is unavailable?
- Which related readings help distinguish a sensor issue from overheating?
- How is the response recorded for the next shift?
What the evidence supports
More alerts do not automatically improve coverage. Repeated low-value notifications can obscure a developing fault. Suppressing every noisy signal can create a different blind spot. Reviews should distinguish an equipment problem from a monitoring configuration problem, with changes controlled and recorded.
An alarm review can examine a small set of real events rather than debate the total number of sensors. Did somebody receive each notification, understand it and record the result? Were there avoidable repeats or gaps in responsibility? This makes the discussion about the operation of the response chain, while leaving the technical setpoints and equipment interventions to the site's authorized specialists and procedures.
A dependable alarm chain connects a meaningful condition to an informed person with a clear next step.
Quick check
How much did you catch? Tap a question to see the answer.
1. What is an alarm, according to the article?
Answer: A request for a decision, not a cooling system by itself.
2. What makes an alert useful after hours?
Answer: Clear ownership and escalation.
3. What context should a notification carry?
Answer: A meaningful location, the operating mode and a link to the response record.
Building an Escalation Path That Works at Night
An escalation path is easy to describe during a planning meeting and harder to rely on at the end of a long evening. The practical test is whether a person who did not write the procedure can follow it under pressure. A few design choices make that more likely.
- Name roles before names. Assign responsibility to a role such as on-shift operator or on-call mechanical lead, then map people to roles in a roster that changes with the schedule. Procedures tied to individual names go stale quickly.
- Define a response window for each level. State how long the first recipient has to acknowledge an alert before it moves to the next level. Without a stated window, an unanswered alert can sit in silence.
- Provide a working backup. Every escalation level needs a second contact who is genuinely available, not simply listed.
- Separate acknowledgment from resolution. Acknowledging an alert means someone owns it. It does not mean the condition is resolved, and the record should reflect both states.
- Test the path. Send a planned test alert during an evening shift and confirm that it reaches the right person, that the contact details work and that the response record is completed.
What a useful alert message contains
A message that can be acted on quickly usually includes the equipment or area in plain terms, the reading and its normal range, the time the condition began, any related readings, the current operating mode and a pointer to the relevant procedure. Those details let the recipient decide whether to investigate, escalate or follow an immediate response step.
Common Weak Points in After-Hours Coverage
Most failures in an alarm chain are not dramatic. They are small gaps that line up at the wrong moment.
- Stale contact information. A phone number or group address that changed during a reorganization can silently break the chain.
- Alert fatigue. When recipients see the same low-value warning repeatedly, they may learn to dismiss it, including on the night it matters.
- Ambiguous equipment labels. A device identifier that means something to the commissioning team may mean nothing to a newer operator.
- Unrecorded handovers. If the day shift was watching a developing condition, the evening shift needs to know that before the next alert arrives.
- Silent monitoring failures. A sensor that stops reporting may generate no alarm at all unless loss of communication is itself treated as an alert.
A short shift handover checklist
- Open alerts and their current owners
- Equipment in a non-standard operating mode
- Planned work scheduled during the coming shift
- Sensors or monitoring feeds known to be unreliable
- Any temporary changes to escalation contacts
Why This Matters Beyond the Control Room
For readers following data center operators and the businesses that rely on them, alarm ownership is part of what sits behind a reliability claim. A facility with excellent equipment can still have a weak response chain, and a well-organized response chain can limit the effect of an ordinary equipment fault. When a provider discusses uptime, the operating practices behind the number are as relevant as the hardware.
This is general explanation of operating practice. Specific setpoints, response steps and safety procedures belong to each site’s qualified specialists.
Questions Readers Ask
Should every alert wake someone up?
No. Alerts are usually tiered so that conditions requiring immediate attention reach a person right away, while informational warnings are reviewed during normal hours. The tiering itself should be reviewed and controlled.
How often should an escalation path be tested?
Often enough that changes in staff, contacts and tools are caught. Many teams test after any significant roster or system change as well as on a regular schedule.
What is the difference between a sensor fault and an equipment fault?
A sensor fault means the measurement is unreliable. An equipment fault means the system itself is not performing. Related readings from nearby sensors often help tell the two apart.
Who should own alarm configuration changes?
A named role with authority to approve them, with each change recorded so the next shift understands why an alert behaves differently.
AI infrastructure explainers and news on iPhone, iPad and Apple Watch.
-
Power & Grid1 month agoTransformer Lead Times Are Becoming a Data-Center Schedule Risk
-
Power & Grid1 month agoGas Turbines on Data-Center Campuses
-
Cooling2 months agoWater Use and Dry Coolers: The Tradeoff AI Sites Cannot Avoid
-
Power & Grid1 month agoBattery Storage at AI Sites
-
Compute & Silicon1 month agoGPU Supply Chains: How AI Hardware Gets Made, Moved, and Bottlenecked
-
Power & Grid4 weeks agoFERC’s Large-Load Orders: The November 16 Grid Deadline Behind the AI Build-Out
-
Capital & Backlog4 weeks agoAI Infrastructure’s Rough Week: Chips Fall 6.7% as Meta Lifts Capex Floor
-
Cooling4 weeks agoLiquid-Cooling Leak Detection and Reliability
